Magnetek VFD Drives for Severe Duty Applications

Check out Magnetek's new systems for severe applications.

IMPULSE D+: Magnetek’s high performance AC Line Regenerative Systems are ideal for adjustable speed applications that include a high demand braking cycle. These industrial grade units take surplus regenerative energy from the motor and return it to the AC power source, reducing total energy consumption and improving energy efficiency.

AC Regenerative Systems are an ideal solution for: High duty cycle cranes, Large cranes with multiple resistor banks for each motion, Severe duty dusty, wet, or volatile environments

AC Regenerative Systems provide: Energy efficiency, Cost savings - payback can be seen in the first year, Elimination of wiring for dynamic braking resistors, Elimination of dynamic braking resistors' maintenance.

The IMPULSE•D+ is a high-performance Active Front End regeneration unit in a chassis drive layout. The Active Front End technology allows the IMPULSE•D+ to minimize line harmonics below IEEE 519 requirements and regulate a consistent DC bus voltage. Combining the IMPULSE•D+ with IMPULSE•G+ and VG+ Series 4 variable frequency drives will provide you with the most energy efficient, durable, and feature-rich crane control system available.

RATINGS

IMPULSE•D+ 230V Class 460V Class
Input Voltage +10% / -15% 200-240VAC 400-480VAC
Input Frequency 50/60Hz ± 3Hz
Motor Rated Current 15-400A 8-560A
Horsepower Rating
5-150HP 5-450HP
Ambient Operating Temperature
-10 to 50°C (14 to 122°F)
Power Factor >0.99 at full load
Overload Tolerance
150% for 60 seconds, 200% for 3 second.

Tool Balancer Jib Crane for Welding Workstation

Here is a simple and easy solution for a welding work area.

The customer had experienced several arm/shoulder injuries due to the tools used for this welding workstation.

We provided a Gorbel Tool Balancer Jib Crane with 6" trolley saddles. The welders could not be happier.  The 6" saddles provide a great way to manage the cables used for the welding tools.

Check out our full line of Gorbel Tool Solution Jib Cranes on our website.

Gorbel Pivot Pro and Vacuum Tube Lifter for Box Handling

We get many requests for vacuum tube lifters.  These can go on a standard jib but the Gorbel Pivot Pro is a much better solution in most cases.  If the operator is repetitively stacking or un-stacking boxes then this is an ideal choice.  They do not have to drag around a heavy jib arm which is especially hard once you go closer to the mast.

Check out the video as you can see how easy it is to use.  https://www.ergonomicpartners.com/video/jumbo-flex-vacuum-lifter-with-pivot-pro-articulating-jib.mp4

Magnetek's New AC Line Regenerative Systems Save Energy, Time and Money

New AC Line Regenerative Systems   Save Energy, Time and Money

IMPULSE®·R Magnetek's new high performance AC Line Regenerative Systems are ideal for adjustable speed applications that include a high demand braking cycle. These industrial grade units capture the extra regenerative energy which would normally be expended by resistors and put that energy back on the AC power source, decreasing installation and maintenance time, and reducing crane energy consumption by 40-45%. AC Regenerative Systems are an optimal solution for: Large cranes with multiple resistor banks for each motion High duty cycle cranes  Severe-duty dusty, wet, or volatile environments IMPULSE®·D+ HHP Two unit types are available to fit your application needs. IMPULSE®·R units are available with ratings from 5-100 HP, while the IMPULSE®·D+ HHP modular, regenerative inverter platform is suitable for uses beyond 200 HP. They can be combined with IMPULSE·G+ or VG+ Series 3 or 4 adjustable frequency drives and sized to fit the expected regenerative need. To learn more about Magnetek's new AC Line Regenerative Systems, visit our website, call us at 314-884-8884 or email sales@ergonomicpartners.com

Informative crane website/blog

Thought some of you might be interested.  Lots of good information on http://www.cranebuzz.com/index.html with numerous links to products, hints, industry standards to name a few.  Hope you enjoy it and find it informative.

Custom Gripper Tool on Gorbel Easy Arm

Check out this custom solution for a work cell.  The customer had experienced several back injuries picking up 50# parts at a very high cycle time.

We provided a custom grip tool on a Gorbel Easy Arm and the operators could not be happier.

Happy New Year

Hopefully this year is as successful as last year.  It appears the market for material handling will remain strong for 2013.  Hope the new year finds you healthy and look forward to a productive year.